What is the wheel torque on a Jeep Cherokee?

What is the wheel torque on a Jeep Cherokee?

Jeep Lug Nut Torque Specs Recommendations

How much horsepower does a 1989 Jeep Cherokee have?

How many horsepower (hp) does a 1989 Jeep Cherokee (XJ) 4.0i Auto have? The 1989 Jeep Cherokee (XJ) 4.0i Auto has 185 PS / 182 bhp / 136 kW.

How much horsepower does a 4.0 inline 6 have?

190 horsepower
The Jeep’s 4.0-liter straight-six engine’s maximum of 190 horsepower and 235 pound-feet of torque made the Jeep famously reliable if a little slow.

What are torque specs?

Recommended torque specifications are unique for each type of vehicle. By definition, torque refers to the amount of rotational force at the point of application. When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation.

What should I torque my Jeep wheels to?

The correct wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station.

How much torque should a Jeep Wrangler wheel be?

The torque is supposed to be 105 ft lbs.

Are Jeep Cherokees reliable?

The Jeep Cherokee Reliability Rating is 4.0 out of 5.0, which ranks it 9th out of 26 for compact SUVs. The average annual repair cost is $520 which means it has lower than average ownership costs.

Why did jeep stop making the Comanche?

The decision to phase out the Jeep Comanche “came from a combination of two factors— low sales and Chrysler’s attempts to make the Jeep brand fit into the Chrysler hierarchy of Plymouth, Dodge, and Chrysler models” with Jeep housing SUVs and Dodge making trucks.

How reliable is the 4.0 jeep engine?

So the engine is said to last 150-300k miles before experiencing any common engine issues. due to the reliability of the 4.0 engine, you don’t have to worry about it having any problems as long the engine is well taken of, you should be fine.

What happens if you dont torque to spec?

Insufficient torque Engines that are running, tend to vibrate. In the case of insufficient torque, it’s the stud or the bolt itself that suffers all the impact, causing it to shear. Alternatively, the engine’s vibrations can cause the bolt or nut to come undone, displacing the tensioner.

What happens if you over torque?

When the joint in question is over-torqued, the flange load can become uneven and weaken the effectiveness of the flange/bolt load. This in turn leads to an increase in blow-out pressure and hydrostatic force, which can cause joint failure.

What kind of torque does a Jeep Cherokee have?

Each Jeep engine has unique head bolt torque specifications. Head bolts hold the engine head onto the engine block and resist the force of engine compression. There are two key pieces of information with each torque specification: the sequential order for tightening the set of bolts and the amount to tighten the bolts at each tightening step.

What are the dimensions of a 1989 Jeep Cherokee?

characteristic dimensions: outside length: 4200 mm / 165.3 in, width: 1790 mm / 70.5 in, wheelbase: 2576 mm / 101.4 in reference weights: estimated curb weight: 1395 kg / 3080 lbs how fast is this car ? top speed: 161 km/h (100 mph) (©theoretical);

How much does a Jeep Cherokee XJ weigh?

Browse Car Specifications… With a fuel consumption of 14 litres/100km – 20 mpg UK – 17 mpg US (Average), 0 to 100 km/h (62mph) in 10.1 seconds, a maximum top speed of 112 mph (180 km/h), a curb weight of 3384 lbs (1535 kgs), the Cherokee (XJ) 4.0i has a naturally-aspirated Inline 6 cylinder engine, Petrol motor.

How many horsepower does a 1997 Jeep Cherokee have?

The Jeep Cherokee (XJ) 4.0i has a Inline 6, Petrol engine with 3960 cm3 / 241.7 cu-in capacity. How many horsepower (hp) does a 1997 Jeep Cherokee (XJ) 4.0i have? The 1997 Jeep Cherokee (XJ) 4.0i has 178 PS / 176 bhp / 131 kW.