How to fix xerox fuser error?

How to fix xerox fuser error?

Power Off the Printer, Unplug the Power Cord, Wait One Minute, Plug the Power Cord Back in, and Then Power On the Printer. 2. Replace the Fuser Assembly*. If the problem persists, contact Support for additional assistance.

What is a fuser error on a Xerox printer?

The Xerox N2125 fuser assembly should be replaced after every 200,000 page impressions. If your printing is high-demand, your fuser assembly may have a shorter lifespan. When your N2125 displays a fuser error and resetting the power to the printer does not clear it, replace the fuser assembly.

What is a fuser system?

A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.

What is open fuser error on printer?

The open fuser circuit error is a pretty straight forward message. The AC current provided to the fusing assembly is either not getting there or the power gets to the fuser but doesn’t come back out so you have an open circuit issue.

How do I reset my toner chip Xerox?

Clear the Message and Reset the % Toner Remaining Value

1. Press the [Login In / Out] button on the Control Panel.
2. Select the [Keyboard] button on the Touch Screen.
3. Enter the username using the keypad on the Touch Screen, and then select [Next].
4. Enter the password, and then select [Done].

How do I reset my Xerox 7535?

To reset the system software from the Control Panel:

1. Login as the System Administrator..
2. Press the Machine Status button on the Control Panel.
3. Select the Tools tab on Touch Screen.
4. Select the Troubleshooting button.
5. Select the Resets button.
6. Select the Software Reset button.
7. Select All Software.
8. Select Reset.

What is a 50.2 fuser error?

The 50.2 fuser error message is a “Slow Fuser” error, which is a time-out error where the fuser is not warming up fast enough. If the 50.2 Slow Fuser error message returns, it’s time to replace your fuser.

Where is the fuser in a Xerox printer?

Open the Right Side Cover, by grasping the top handle on the right side of the printer and pulling down. WARNING: The Fuser and surrounding parts are very hot to touch.

How do I reset my Xerox WorkCentre 7120?

Re: Xerox WorkCentre 7120 Factory RESET

1. Enter UI Diagnostic mode ( Accessing UI Diagnostics). Select Initialize NVM.
2. Select the subsystem to be initialized and select Start.
3. A confirmation message appears.
4. A message indicating completion will appear.
5. Select the Confirm button.

How to fix Xerox WC 7855 fuser system error?

You need a certified tech to rebuild your system now, you may be able to fix it by doing a forced altboot with no clone and no data backup, but no guarantees because some NVM values don’t get re-written even after a full load. This forum will not be helping with NVM settings, there are good reasons why they are hidden in Diagnostics mode.

Why is my Xerox fuser 10-527 not working?

10-527 due to broken NVM values for the fuser, which you mention resetting in 2 machines intentionally in one of your other posts. The reset caused corrupted values for the Fuser module, and due to those values, it gets reported that the thermister has opened after gets hot during a run.

What does 04-563 stand for on Xerox fuser?

04-563 is for the rear cooling fan, I would assume it is broken, or blocked by being pushed up against a wall. Please be sure to select ” Accept Solution ” and or select the thumbs up icon to enter Kudos for posts that resolve your issues.

What should I do if my printer fuser is not working?

1. Power Off the Printer, Unplug the Power Cord, Wait One Minute, Plug the Power Cord Back in, and Then Power On the Printer. 2. Replace the Fuser Assembly*. If the problem persists, contact Support for additional assistance.