How do I set up my Eye4 camera?

How do I set up my Eye4 camera?

1. Software download. ① Go to www.eye4.so to download the APP.
2. Register. ① For Android/iOS APP, click on “Register now”, create a user name and password to finish register.
3. Add cameras to the network.
4. 3.1 Scan QR Code.
5. 3.2 Other ways of adding.

What is Eye4 app?

Eye4 is a remote video system developed for civilian consumer market, including cloud service platform, cameras, and various viewing software. Technology changes our lives; technology changes our field of vision! Welcome the remote video to the thousands of families! Witness the power of Technology!

How do I reset my Eye4 camera?

Please restore factory settings, the default initial password: 888888 Operation: power on camera, then find out the camera “ reset “ button, hold down the thimble which press the button for about 15 seconds until camera reboot, camera restore factory settings success.

How do I change the WiFi on my Eye4 camera?

Please follow the steps below:

1. Click on the three dote on the right corner of the camera, go to. parameter settings.
2. Go to WiFi Settings.
3. In the WiFi settings, choose your home WiFi and input the WiFi.
4. Pay attention to the prompt and click on ‘confirm’.
5. Unplug the ethernet cable from the camera, and wait for the camera.

Is the Eye4 app free?

Eye4 is a video system application that is used for monitoring and surveillance. This video system app works flawlessly on PCs that use mobile emulators to run android apps….Download Eye4 APK Free.

How do I connect my Vstarcam to WiFi?

How configure P2P IP camera?

1) This manual shows in a few easy steps how to use the camera via P2P and wifi, so ”plug and play”, via your smartphone or tablet. 2) Take the camera out of the box. 3) Connect the power adaptor to the IP camera. 4) Connect a RJ45 network cable to your camera and the other end to your router or switch.

How do I reset my eye Cloud camera?

A: Please power on the camera, press and hold the reset button on the back of the camera for 5 seconds. Release your hand after you hear the voice saying “Reset Complete”. And then connect the camera to the network again.

How do I reset my eye camera?

Please follow these steps to reset your camera:

1. Press down the power button and unplug the power cable to turn off the EYE-02;
2. Wait for 20 seconds;
3. Press and hold the power button and insert the power cable at the same time;
4. Wait for 3 long beeps, then release the power button.

How do I connect my starcam to my WiFi?

Go to Settings on your iPhone and select Wi- Fi. Select a camera that has the last four digits of the serial number displayed on the back of the camera. (If password is requested, enter ‘smartcam’.) Plug in the power adapter and connect it to the camera.

How to set vstarcam on eye4 smart cloud?

1. After landing software, select smart home, switch to the Device Options page; 2. Locate the socket need to set timing functin,click into the control page, then click the timing button; 3. Choose date and time when you want open or close, and then confirm. [ Read more] 1. Log into the device management, Click the corresponding model; 2.

What do you need to know about eye4?

Eye4 is a remote video system that developed for civil consumer market, including cloud sever platform, IP camera, and various platform client software. Technology change life, technology change your vision! 1, Advanced cloud structure, massive storage, high reliability, and high security.

What are the eye4 apps on Google Play?

2, Plug & play: easy to operate, no special network knowledge required. 3, Wide application: can be applied in baby, pet care, staff management, anti- burglar ect.

https://www.youtube.com/watch?v=caNNTt94OxI