What is the difference between RP19804 and RP46074?

What is the difference between RP19804 and RP46074?

The RP46074 Cartridge is for 13 & 14 Series Tub/Shower Valves. It replaces single control valves cartridges with grey upper cap made after 2005. The RP19804 Cartridge is for 13 & 14 Series Tub/Shower Valves. It replaces single control valves cartridges with white upper cap made before 2006.

What is the faucet stem?

The cartridge or stem is basically all the moving parts inside this faucet. Each faucet handle (hot and cold) has its own cartridge, a valve that turns with the handle to control the flow of water into the faucet spout. If you have a very old two-handle faucet, it may be a compression-type rather than a cartridge.

How do I know what faucet cartridge to buy?

Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.

Does RP25513 replace RP24096?

From the United States. This is an identical Delta replacement. As others have stated the only difference between this part (RP24096) and the RP25513 is the included 1/4 stop. If you have your original part, you don’t need the slightly more expensive RP25513 because the 1/4 stop can be salvaged from your existing one.

Can RP46074 replace RP19804?

RP19804 cannot be replaced with RP46074 unless the rough in valve has also been replaced. If the older rough in valve is still installed, RP19804 would still need to be used. A trim that comes with RP46074 can be used in place of the current trim, but the cartridge should remain the same.

How long should a shower cartridge last?

The valves are easy to move against pressure. Control the volume from off to full on by leaving them set to the same temperature. The system costs about $30 to replace, but they last for 20 to 30 years.

How much does a plumber charge to replace a shower cartridge?

On average, it costs between $200 and $400 to replace a shower cartridge. Various factors impact the replacement price, including labor, parts, and location. If you’re looking for a more accurate quote, then contact a plumber near you.

What is the difference between the Delta 14 and 17 series?

What’s the difference between the 14 and 17 series? Answer: The 14 series has one handle that controls both volume and temperature. The 17 series has two handles that control temperature and volume separately.