How much does a L76 weigh?
How much does a L76 weigh?
It weighs roughly 100 lbs. less than a comparable cast-iron engine block. The Gen IV 6.0L (L76) is fitted with high-flow cylinder heads, based on those developed for the high-performance LS2 and LS6 car V8s.
How much does an LS6 engine weigh?
about 460 lbs.
The engines weigh about 460 lbs. fully dressed with accessories and flexplate.
Is the L76 an LS?
The L76—like its LS2 sibling—is a 6.0L, Gen. 4, aluminum small block engine that was used both in GM cars and trucks….L76 (Car) Engine Blocks.
| L76 (Car) Block Specs | |
|---|---|
| Material | Aluminum |
| Displacement | 6.0L / 364 c.i.d. |
| Bore Dia. | 4.000 in. |
| Stroke | 3.622 in. |
What does a 5.3 lm7 weigh?
So I would guess a complete 5.3 weighs in around 360-400 lbs.
What is the difference between L76 and LS2?
LS2 heads are based on the LS1 design, but L76 heads are based on the better-flowing L92 design. L76 heads are basically L92 heads for use with a 3.988-inch bore (vs the 4.065-inch bore of the LS3 and L92).
How much power can a L76 handle?
about 800 hp.
They can handle about 800 hp. and 6,500 rpm in boosted applications. If you’re getting forged pistons, upgrade to Forged Connecting Rods at the same time.
What’s better LS2 or LS6?
The LS6 has a has bigger camshaft, better intake manifold, and marginally better cylinder heads. The LS2 has more displacement and is cheaper to buy used.
How much does a fully dressed 2JZ weigh?
Weight of the car is 3250-3300 lbs.
Is L77 a LS2?
L98/L76/L77 Introduced in 2006, the L98 and L76 are 6.0-litre variants of the LS2. The L76 was used in February 2006-on VZ and VE (auto only) Holden Commodores, Statesmans and Caprices (WL and WM models). The L77 debuted in the Series II VE Commodores for both automatic and manual transmission choices.
Are 5.3 and 6.0 blocks the same?
Flassh, Actually the 6.0 motor is the same small block that the 5.3 utilizes. The 5.3 is 327 cu. in. and the 6.0 is the same block bored to a 366 cu.
Are 5.3 LS Motors?
Displacement Options of LS engines Car engines came in 5.3L, 5.7L, 6.0L, 6.2L and 7.0L size engines, some configured for front-wheel-drive. There are also options when deciding if you want an iron or aluminum block. The rise of stroker kits has also increased the number of displacement options.
Is the LS2 a good motor?
The LS2 also has the convenience of being one of the most adaptable engines, with the ability to fit LS1, LS6, LS3, and L92 cylinder heads. In summary, the LS2 is clearly the better all-around package from the factory.
