How do I fix code P0717?
How do I fix code P0717?
What repairs can fix the P0717 code?
- Replacing the valve body.
- Replacing the input/turbine speed sensor.
- Replacing one or more shift solenoids.
- Replacing or repairing damaged, shorted, or open wiring or circuits.
- Replacing the engine coolant temperature sensor.
- Draining, flushing, and replacing the transmission fluid.
What causes P0717?
Code P0717 is triggered when the transmission’s Input Speed Sensor isn’t providing a signal. This is a critical problem because with out this signal, the Transmission Contorl Module or TCM can’t properly shift the vehicle from gear to gear as the vehicle needs to change speed and rates of acceleration.
Where is the input turbine speed sensor?
Located on or inside your vehicle’s transmission, the turbine speed sensor measures the RPM of the turbine shaft. Once the PCM or TCM detects an irregularity in the turbine speed input, it will trigger the illumination of the Check Engine Light.
Where is the speed sensor on a Chevy Silverado?
The Chevy Silverado speed sensor is located at the transmission output shaft. The speed sensor is responsible for talking with the CPU and reporting the number of times the shaft rotates, which translates into the speed of the car. When it does this the transmission in turn will be able to shift gears when it needs to.
Can you drive with a broken speed sensor?
That is why in general, it is unsafe to drive a vehicle with a broken wheel speed sensor. If the wheel speed sensor becomes damaged or wears out, initially you probably won’t notice much difference in the way your car performs if your ABS light comes on unless you are driving on slippery pavement.
How much is it to change a speed sensor?
To replace the speed sensor, you are going to pay, on average, between $330 and $380. The labor should only cost you between $80 and $100, while parts will run you about $265.
What is code P0734 mean?
A P0734 trouble code indicates that an abnormality has been detected in the gear ration of one of the automatic transmissions gears, causing the storage of a code in the Powertrain Control Module (PCM) and illumination of the Check Engine Light.
Can I drive my car with a faulty speed sensor?
In general, it is unsafe to drive a vehicle with a broken wheel speed sensor. The car’s computer will not be able to determine the speed that your vehicle is traveling, so it might apply the brakes at a faster rate than necessary or increase the engine power.
How do you test an input speed sensor?
You can test your VSS to make sure it’s functioning properly by using a device called a multimeter. Start by disconnecting and removing the VSS from your engine so you can test it. You can then connect it to a multimeter and set the multimeter to the AC setting.
What happens when a transmission speed sensor goes bad?
Therefore, a failing speed sensor will have a direct impact on automatic transmission operation. One of the most common signs of a bad speed sensor is abnormal automatic transmission operation. If the VSS is faulty, the transmission may exhibit symptoms such as delayed shifts, hard shifts, and limited gear operation.
What are symptoms of a bad speed sensor?
The following signs will show you if your transmission speed sensor has failed.
- Cruise Control Fails. The main function of the speed sensors is to monitor the output and input shaft speed.
- Improper Or Harsh Shifting.
- The Check Engine Light Indicates.
