How do I know what model my Citizen Watch is?

Some Citizen watches have a serial number that can be found on the caseback. Most Citizen watches have a model number on the caseback. Every Citizen watch will feature the Citizen logo on the watch face. Check the font of the letters is consistent with the official brand logo and that the quality of finish is high.

How do I know when my Citizen Eco Drive is fully charged?

When the low charge feature is activated, your watch should be fully charged by exposing it to bright light as outlined in recharging guidelines in your instruction manual and in the technical support section of our website.

Is Citizen a good watch?

When it comes to quality, the Citizen brand has been known to make watches that will tick for well over 20 years. If that wasn’t proof enough, every watch sold is covered by a 5-year warranty. For quality craftsmanship and elegance, the Citizen brand is the best in the world and features a rare, self-recharging design.

What do the numbers on the back of a Citizen watch mean?

A case number is engraved on the case back. (Figure on the right) The first 4 digits of the case number represent the movement number of the watch. In the example on the right, “1234” is the movement number.

How do you reset a citizen eco drive e820 watch?

ALL RESET AND 0-POSITON PROCEDURE Simultaneously press and hold the upper right (B) and lower right (A) buttons for two seconds then release. Following a confirmation tone, the minute, chronograph second, and chronograph minute hands will move back and forth slightly indicating the ALL RESET procedure was successful.

What is a citizen radio controlled watch?

What are Radio Controlled Watches? Radio controlled watches connect to atomic clocks to make sure that the time kept on your watch is as precise as it can possibly be. Citizen claim that their radio controlled watches have a margin of error of just one second in 100,000 years.

Can you overcharge a citizen eco-drive watch?

There is no risk of overcharging this watch. (Overcharge prevention function is included.) 1. Pull the crown out to the time setting position (the second hand will stop when the crown is pulled out in the case of the three-hand model).

Where can I find the Citizen Watch setting instruction manual?

Access the Setting Instruction Manual for your particular Citizen watch in one of two ways: 1 USING CALIBER NUMBER. Referencing the diagrams below, locate and enter the movement Caliber Number on your watch’s… 2 USING MODEL NUMBER. Enter your watch’s model number directly into the site search bar (“Search Product” field) to be… More

What is the case number on Citizen Watch Global?

Your watch features a case number engraved on the case back (refer to figure to the right). The first four characters of the case number represent the movement caliber number of the watch. In the example on the right, “1234” is the movement number.

How to lock the crown on Citizen Watch Global?

Screw down crown Rotate the crown counterclockwise until it releases from the case. Push the crown in to the case. With gentle pressure towards the case, rotate the crown clockwise to secure it to the case. Be sure to tighten firmly. Screw down push button Rotate the locking screw counterclockwise, and loosen until it stops.

Is the charge of a Citizen Watch Good?

The watch is fully charged. Use the watch without worrying about the charge level. The charge level is good. Use the watch without worrying about the charge level. The charge level is not stufficient. The charge level is insufficient. The watch must be charged immediately. Checking the power reserve