How do I reprogram my marantec keypad?

How do I reprogram my marantec keypad?

Slide the protective cover of the Marantec wireless keypad up to access the number pad. Press down on the “0” button and hold it for three seconds until you see the power indicator light begin to blink repeatedly. You can now begin to reprogram the PIN number.

How do I activate my garage keypad?

Program Garage Door Keypad PIN Using Your Garage Door Opener Press and release the LEARN button. Once the LED is lit, you will have 30 seconds to complete the next step. Enter a 4-digit PIN of your choice, then press and hold the ENTER button until the garage door opener light blinks. The PIN programming is complete.

How do you reset a marantec M13 631?

M13-631

1. Press and hold the (1) button for at least 3 seconds.
2. Enter any programmed PIN then press ENTER.
3. Enter the temporary 4-digit PIN of your choice then press ENTER.
4. Press the number of operations the temporary PIN will be active for (1-99), then press the ENTER button.

How do you reset a marantec garage door opener keypad?

How do you reset a marantec garage door keypad?

1. Press and HOLD the “0” button on the keypad for about 3 seconds until you see the red LED on the keypad blink rapidly (release the “0” button when LED light starts blinking)
2. Now enter the EXISTING 4-digit pin code and press & release the ENTER button.

How do you clear a marantec keypad?

Does a garage door keypad have a battery?

Have you replaced the battery in the keypad? A lot of people do not realize that even though we mount the opener to the wall, these keypads are wireless and do require batteries. The battery compartment is on the bottom of the keypad and can be accessed by opening the cover while mounted.

Where is the keypad on a marantec garage door opener?

If you have a Marantec garage door opener then the Marantec wireless keyless entry keypad is the answer. After programming your own personal 4 digit PIN number into the Marantec keyless entry the keypad can be mounted to the exterior jamb of your garage.

How long does it take to enter Pin on marantec m13-631 keypad?

If you are programming the keyless to a 75424 Plug-in Radio Receiver then once the keyless is programmed you will need to hold the enter button for 3 to 4 seconds every time you enter your 4-digit PIN number to open or close the garage door. This is the way it works with all M13-631 Keyless & 75424 Plug-in Receiver combinations.

How does marantec wireless keyless entry system work?

A one-button-to close functionality allows the garage door (s) to be closed by the touch a single button. The sliding cover not only protects the keypad from the elements but also controls the illumination as well as the energy saving mode of the Marantec wireless keyless entry system.

What kind of radio do you need for marantec keypad?

Your Marantec operator has to have a 315MHz radio receiver for the keypad to work. Look on the back of your Marantec remote – if it’s a model M3-2312 or 382 Digital remote and has 315MHz printed on the back of it then the M13-631 Keypad will be compatible.