How do you build a reinforced concrete slab?

How do you build a reinforced concrete slab?

  1. PREPARE the ground.
  2. FIX the edge formwork.
  3. INSTALL service pipes.
  4. LAY concrete underlay.
  5. FIX steel reinforcement in the beams.
  6. FIX steel reinforcement in the slabs.
  7. PLACE and compact the concrete.
  8. FINISH the slab surface.

What is a reinforced concrete floor slab?

What is a reinforced concrete floor. A reinforced concrete floor is one that is made from a slab, which is a flat plate made of concrete, that has both surfaces parallel to each other and inside has steel beams that support the structure.

How are slabs constructed?

On-site concrete slabs are built on the building site using formwork – a type of boxing into which the wet concrete is poured. If the slab is to be reinforced, the rebars, or metal bars, are positioned within the formwork before the concrete is poured in.

How thick should a reinforced concrete slab be?

In general, 6 inch (150mm) slab thickness is considered for residential and commercial buildings with reinforcement details as per design.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

Do you need gravel under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How long does concrete slab last?

A poured concrete slab foundation with a block base can last 100 years or more, more than a lifetime, if properly designed. Slab foundation termite testing will last 12 years as long as the chemical barriers remain intact.

What is the ratio of concrete slab?

What is RCC? Why TMT Bar is required in RCC?

Concrete Grade Proportion of Cement : Sand : Stone pieces Expected Compressive Strength at 28 days
M10 1 : 3 : 6 10 N/mm2 or 100 Kg/cm2
M15 1 : 2 : 4 15 N/mm2 or 150 Kg/cm2
M20 1 : 1.5 : 3 20 N/mm2 or 200 Kg/cm2
M25 1 : 1 : 2 25 N/mm2 or 250 Kg/cm2

What is ground floor slab in construction?

Concrete floor slab construction process includes erection of formwork, placement of reinforcement, pouring, compacting and finishing concrete and lastly removal of formwork and curing of concrete slab.

Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Can I pour a 3 inch concrete slab?

Here, pouring a concrete slab 4 inches in thickness is fine. While you may choose to reinforce it with rebar, wire mesh should be sufficient. A 3- to 4-inch slab will work for the floor of a storage or tool shed, workshop, garden shed, or playhouse.

https://www.youtube.com/watch?v=Ditg6akoI38