How long is a typical pinewood derby track?
How long is a typical pinewood derby track?
32 feet
How long do you want your track? Typical wood tracks are 32 feet plus a landing zone. Some tracks extend to 40 feet to make the race longer and more exciting, but you must consider that some cars may have difficulty reaching the finish line with longer tracks. The starting gate of the track should be four feet high.
What are the official dimensions for a pinewood derby car?
The overall length of the car shall not exceed 7 inches. The overall width of the car shall not exceed 2 ¾ inches. The car must have 1 ¾” clearance between the wheels. The car must have 3/8” clearance underneath the body so it does not rub on the center guide rail.
Does a pinewood derby car have to be 7 inches?
Can a pinewood derby car be shorter than 7 inches? Yes, you can make your car shorter but it is not recommended. A shorter car will have a lower center of mass at the start so it will have less energy to convert into speed when going down the track.
How much does a pinewood derby track cost?
| Track | Description | Price |
|---|---|---|
| 349 | 3-Lane 49ft. Track | $996.00 |
| 435 | 4-Lane 35ft. Track | $981.00 |
| 442 | 4-Lane 42ft. Track | $1,137.00 |
| 449 | 4-Lane 49ft. Track | $1,293.00 |
What is a fast time for pinewood derby?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).
How tall should a pinewood derby track be?
How long do you want your track?Typical wood tracks are 32 feet plus a landing zone. Some tracks extend to 40 feet to make the race longer and more exciting, but you must consider that some cars may have difficulty reaching the finish line with longer tracks. The starting gate of the track should be four feet high.
What kind of wood do you use for a derby track?
Electronic timers are worth the cost for three and four lane tracks, as sometimes races can be too close to decide a winner by eye. The most common building material for a derby track is pinewood. Pinewood is lightweight and durable enough to make a decent pinewood derby track.
What are the rules for the pinewood derby?
Official Pinewood Derby Rules. (Rules from BSA Pinewood Derby Kit) Car Dimension Rules. The overall length of the car shall not exceed 7 inches. The overall width of the car shall not exceed 2 ¾ inches. The car must have 1 ¾” clearance between the wheels. The car must have 3/8” clearance underneath the body so it does not rub on the. track.
What kind of track do you need for a derby car?
Wood tracks are usually 32 feet long and aluminum tracks are 45 feet long. Alunimum provides a smoother surface than wood and is more durable. The advantage of wood is that you can usually scrounge up most of the material at low cost. The track should be about four feet high at the starting gate.
