How much horsepower can a 727 transmission handle?
How much horsepower can a 727 transmission handle?
The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.
What vehicle has a 727 transmission?
The aluminum-cased A-727 was used in all Mopar vehicles from 1962 into the late ’80s. Other manufacturers began adopting this unit for their performance vehicles in the mid-’60s. The Jensen Interceptor, with its Chrysler 383 engine, used a Torque Command “8” as its automatic transmission choice.
How much does it cost to rebuild a 727 transmission?
around hear they usally get between $300.00-$500.00 for a rebuild if you take the trans to them, coarse for that kind of money you can bet they use the cheap kits.
Whats better 904 or 727?
They found that, built equally and with the same spec converter, a 904 was about . 15 faster in the 1/4 mile than a 727. The reason being is that it has smaller, lighter components and a little less friction internally.
Where is TCI transmission located?
Ashland, MS
Currently located in two large facilities in Ashland, MS, some 45 miles from parent company the COMP Performance Group™, TCI® continues to set trends and expand its line of quality transmission torque converter and accessory parts.
How much does a 727 transmission weight?
Gearing for the 727 is 2.54:1 for 1st gear, 1.54:1 for second, 1:1 for third and 2.21:1 for reverse. The weight of the transmission is a hefty 161 lbs.
How strong is a 727 transmission?
The strength of the 727 is rarely contested. From the factory, they came against engines ranging up to the 426 Hemi. They are unusually strong transmissions, seeing service with hotrodders and heavier truck applications. The duty range of the 727 is often likened to the GM TH400 and Ford C6 automatics.
What is the difference between a 46RH and a 46RE?
They both use the same front half up to the bell housing, but the rear is different. The 46RH is longer overall and non computer controlled for shifting. The 46RE is the short one and is computer controlled shift points.
How good is a 727 transmission?
The A-727 transmission is robust and highly adaptable in several applications which can be attributed to its widespread use in about 30 years. Its strength meant it could be used in Chrysler cars and non-Mopar applications such as work trucks as well as high-performance vehicles like sports cars.
What kind of transmission does a Mopar 727 use?
727 Transmission The 727 or Torque-Flite 8 – is the King Kahuna of Mopar trannies. Ideal as a Street & Strip unit in stock and modified muscle cars, and a strong candidate for full-on drag cars, many modifications are available for this unit to make it ideal for many classes and power levels.
What is the Torqueflite 727 transmission part number?
Automatic Transmission, Reverse Shift Pattern, Trans-Brake, Manual Valve Body, Chrysler, Torqueflite 727 Part Number: TCI-112500
What is the gearing on a Chrysler 727?
Gearing for the 727 is 2.54:1 for 1st gear, 1.54:1 for second, 1:1 for third and 2.21:1 for reverse. The weight of the transmission is a hefty 161 lbs.
Is the 727 Torque Flite 8 a dragster unit?
The 727 or Torque-Flite 8 – is the King Kahuna of Mopar trannies. Ideal as a Street & Strip unit in stock and modified muscle cars, and a strong candidate for full-on drag cars, many modifications are available for this unit to make it ideal for many classes and power levels.
