How much HP can you get out of a 351W?
How much HP can you get out of a 351W?
Running Holley HP EFI management, sans turbos, the 351 Windsor dyno’d at 409 horsepower and about 405 pound-feet of torque. That’s pretty stout, but nothing to shout from the mountaintop.
How much does it cost to rebuild a 351 Windsor?
If they bore it out (say 0.030 which it will likley need if it’s got 160K on it) you’ll need at least new pistons as well as of course all new bearings and such. Ask around your area and find a trustworthy, reputable guy. Ballpark, I’d say about $2500 for the machine work, rebuild kit, cam, assembly, balance.
How much is a 351 Windsor engine worth?
How much is a 351 Windsor engine worth? As far as values it certainly depends on supply and demand but if the engine is in reasonably good rebuildable condition and an early example, I would think it worth somewhere between $300 and $450.
Can you put gt40 heads on 351W?
I had those heads on my car with standard length roller cam pushrods and I never had a problem… And they will work on the 351W also.. Just make sure you use ’78 and newer 351W pushrods to use with the GT-40 heads…
Which is better the 351C or the 351W?
The 351W has the best shortblock, the 351C has the best (factory) heads. Back in the days before aftermarket heads came out, the 351C was the only way to go. The 351W (with heads originally designed for a 221ci engine) had a built-in case of asthma! They were considered ‘door stops’ and -might- be found in your tow vehicle, but NOT your race car!
What is the difference between A 351W and 351C?
the radiator hose (and thermostat housing) sticks vertically right out of the top of the engine block.
What is the firing order for a Ford 351W?
According to Ford Motor Co. engineers, the 5.0L H.O. adopted the 351W firing order (1-3-7-2-6-5-4-8) to improve the intake manifold sound quality. Ford’s 5.0L H.O. has a distinct sound that benefits greatly from the addition of a cold air intake system and a pair of chambered mufflers. Check out the V8 firing order chart and see how the 302 and 5.0L H.O. (listed below as the “5.0L EFI”) compare.
What is the firing order on a 1987 351 Windsor Ford engine?
The firing order for the 351 Windsor is 1-3-7-2-6-5-4-8 with the No. 1 cylinder located on the right side of the engine at the front. This firing order is different from the rest of Ford Motor Co.’s small-block engines.
