What does F21 mean on a Bosch classixx 6 washer?
What does F21 mean on a Bosch classixx 6 washer?
F21 is a critical fault – either the motor or the main control board (could be both) has a serious problem. However, it can also occur if there are spikes in the mains and it upsets the control board. Try clearing the error code table and reset the control board as follows: 1.
What does code F18 mean on my Bosch washing machine?
What do the washing machine Error E18 / F18 mean? These error codes indicate the pump time has exceeded its limits. Why am I getting this washing machine error code? This could happen for several reasons: blockage inside the filter, blockage inside the draining hose or a problem with the pump.
How do you reset a Bosch top load washer?
Turn the Bosch washing machine’s selector to “Off.” For a full reset, unplug the machine for 30 seconds and plug it back in. Turn the selector to “Drain,” and restart the drain program.
How do you reset a Bosch F21 washing machine?
To reset the F21 error on a Bosch machine, turn the program knob from the off position (12 o’clock) to the 6 o’clock position and immediately press and hold the spin button. Then while holding the spin button turn the knob to 7 o’clock position and continue holding the spin button for 15 seconds.
How do I fix the F21 on my Bosch washing machine?
Other malfunctions
- Turn the program selector to the off position.
- Turn the selector to the spin.
- Press and hold the button responsible for switching the revolutions of the drum.
- Turn the program selector to set the “drain” mode.
- Press on the button of turns switching again and wait some seconds.
How do you reset a Bosch washing machine?
How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release.
How do I troubleshoot my Bosch washing machine?
Bosch washing machine problems with spin can be easily fixed by a qualified engineer. The machine also won’t spin if the lid switch is faulty, the drive belt is broken, or the door won’t close. Again, this is most likely to be caused by a kinked or blocked hose, or a blocked filter.
Why does my Bosch washing machine keep stopping?
If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle.
What is the error code for a Bosch washing machine?
Error Code 5 – Water detected in the base. The WAE range of Bosch washing machine have a sealed base in case of any leaks. If there is a leak any water will be detected in the base of the washing machine and display Error code 5. See our guide on why is my washing machine leaking?
How to return to normal Bosch Classixx 6?
Bosch Classixx 6 1400 w/m display flashing display shows key and 48 min. How do I return to normal? A grandchild has been playing with the … read more Vocational, Technical or Tra…
Why is the key flashing on a Bosch Classixx 6?
ON A BOSCH CLASSIXX 6 THE “KEY” WARNING IS FLASHING. THE MACHINE WORKED PERFECTLY 20 MINS AGO. WHY PLEASE
What does a fault code 6 mean on a washing machine?
Fault Code 6 – Washing machine takes longer than 6 minutes to empty. This fault code indicates that water is unable to drain from the machine at the end of a cycle. Normally it will mean that you have a blockage or the drain pump is faulty. For further help see our guide on fixing a washing machine that won’t empty water.
