What size socket fits the axle nut?
What size socket fits the axle nut?
This 36mm axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
What are the most common axle nut sizes?
The 5 most common axle nut sizes for Ford, Dodge, Toyota and GM vehicles!…Description.
| Item No. | Description | Weight |
|---|---|---|
| 30410 | 3.25″ 8 pt. Axle Nut Socket | 2.7 lbs (1.2 kg) |
| 30411 | 3.5″ 6 pt. Axle Nut Socket | 2.95 lbs (1.3 kg) |
| 30412 | 3.75″ 8 pt. Axle Nut Socket | 3.15 lbs (1.4 kg) |
| 30413 | 4″ 6 pt. Axle Nut Socket | 3.35 lbs (1.5 kg) |
What size is the axle nut on a 2007?
The front axle is secured with a 32 mm nut. “MM” stands for millimeters. Most wheel axles are measured and ordered using the metric system.
What size is the axle nut on a 2004?
The 2004 dodge ram 1500 front axle nut size is 36mm.
What size is Honda axle nut?
The nut part should be 36mm in diameter. The part # 90305-S30-003 should be a 32mm size.
What is the most common spindle nut?
There are several manufacturers offering one-piece spindle nut systems. The two most common are the Axilok® nut by Metform (see Figure 1) and the PRO- TORQ® nut by Stemco (see Figure 2). Each of these systems has a specific installation procedure required by the manufacturer to set wheel bearing end-play.
What happens if you over tighten axle nut?
It’s possible to damage the wheel, rotor, and hub assembly. The wheel can come off if over-torquing the nuts/bolts is done.
What size is the axle nut on a Honda Civic?
Details. 1 1/4″ socket fits the 32mm spindle nut: torque to 134 lb-ft. Ball joint nut: torque 36 to 43 lb-ft.
How much torque does an axle nut need?
Generally, jam nuts less than 2-5/8″ should be torqued to 200-300 lbf-ft; nuts 2-5/8″ and over should be torqued to 250-400 lbf-ft.
Is the axle nut really a genuine Subaru part?
This axle nut worked but is questionable whether it’s a genuine Subaru part as stated. It came in a generic bag, not an OEM bag. Not a fan of parts that are listed as “genuine” or “OEM” when they are most likely the same cheaper part I can get at a LPS. 3.0 out of 5 stars Is it really a Genuine Subaru part?
How big of socket do I need for axle nut?
BTW, 36mm is old school axle nuts. i’ve sheared 2 1/2″ sockets and one 1/2″ breaker bar, moving up to 3/4″ socket wrench was an excellent decision. makes axle nuts a breeze. use a torch if yours is tight and you don’t have a 3/4″ set. heat the nut up for one minute and immediately attack it with your socket.
Can a Subaru nut bend into a slot?
The glossy unmarred finish of the nut did make it mildly emotionally draining to bend into the slot, but I forged ahead and hit it with a set until it was no longer recognizable and I was weeping on the garage floor. Review categories: what is sheerness? This is an axle nut for a Subaru, and does what you’d expect it to do.
Is the axle nut fit a 2016 Crosstrek?
Axle Nut – fits a 2016 Crosstrek – Great! Bought to replace as part of installing a new wheel hub assembly on my wife’s 2016 Crosstrek to save money over the stealership. Looks just like OEM, threaded nicely, locked down like it should.
