Where is the Xbox 360 DVD drive key?
Where is the Xbox 360 DVD drive key?
Removing the DVD Drive From the Xbox 360 Squeeze the left side of the top of the faceplate with one hand while putting two fingers of the other hand inside of the USB door at the bottom of the faceplate. Lift up on the USB door while pulling the top of the faceplate to remove it from the Xbox 360’s case.
Can you swap Xbox 360 DVD drives?
6 Answers. Unfortunately, you can’t just swap dvd drives in an xbox 360 and have them work. You have to replace with the same type of drive and retrieve the dvd key from the original drive and spoof it to the new drive.
What can you do with a flashed Xbox 360 DVD drive?
Want to play burned games on your Xbox 360? In order to play backups, you will need to flash your Xbox 360’s DVD drive so that it is running custom firmware. This will allow the drive to read discs that have been burned, and proper flashing still allows you to connect to Xbox Live.
How do I remove the disc tray from my Xbox 360?
If the disc drive is still stuck closed, insert the paper clip into the adjacent hole (to the right) and push again. If you’re successful, the disc tray will pop out slightly. Plug the power cord into the back of the console. Press the eject button to open and close the disc drive.
Can Xbox 360 read DVD R?
You don’t need any special software or hardware to play DVDs on your Xbox 360 console. Simply insert a DVD into the disc drive and turn on the console….Supported formats.
| Type | Description |
|---|---|
| DVD discs | DVD–video, DVD–audio, DVD–ROM, DVD-R/RW (read only), DVD+R/RW (read only), Dual layer DVD+R9 |
Why is my Xbox not reading my discs?
Perform a hard power cycle by holding down the Xbox button on the console for 10 seconds. Once the console has completely shut down, press the Xbox button on the console again to restart it. Try your disc again. If the console can now read the disc, you can revert to instant-on power mode.
Where is the DVD key on Xbox 360?
You can find the DVD key under the Drive Key part of the Jungle Flasher program. It can also be reextracted from the saved firmware file using the Jungle Flasher’s Firmware Tool tab. That’s where this guide ends. You should now have a dump of your Xbox 360’s DVD drive firmware, and the DVD key tied with your system.
Can a firmware key be extracted from an Xbox 360?
In order to flash a custom drive firmware, use an ODE, or replace the DVD drive, you must first obtain the key from the original DVD drive. This is a guide on how to extract the Xbox 360 DVD firmware key using household items.
What is the encryption key for Xbox 360?
The Xbox 360 system is married to the specific DVD drive when it ships from the factory. Two parts in the DVD firmware is linking it to the 360, the first is the DVD encryption key, e.g. 9174C2D5905AE8B9ACB23CD116XXXXXX, and the second is the drive identity, e.g. PLDS DG-16D2S 74850CA0A1D608CG81881200VM1 .
How does a DVD drive work on an Xbox 360?
The Xbox 360 has whats called a “DVD key” paired to each motherboard and DVD drive combo. The DVD key on the motherboard must match the DVD key on the drive or the console will not boot games.
